HD-OEM: 27020-40
Part Number: 35-0286
UOM: 1 - EA

Summary:
Four bolt WR intake manifold for Linkert carburetor is cast iron with zinc plating. NOTE: For WR and K use, order correct manifold nuts and seals separately. Installation requires the nipples to be screwed into the cylinder depth so that the manifold alignment is correct.


Fitment: K 1952-1956 WR 1941-1952 KH 1954-1956


Tech. Notes:
To install the WR manifold on a 45" cylinder, on W and G models, the intake manifold nipples must be replaced with #9423-1 larger nipples. Suggested to use with #35-1707 Manifold Nipple Set To be installed on WL models 0.100" must be machined from eash spigot for a total of 0.200" overall.

Measurements: Intake Bore I.D.: 1-9/16"

Country of Origin: Imported